3U CompactPCI form factor • PowerPC MPC8545E @ 1.2GHz • up to 1GB DDR2-400 SDRAM with ECC • up to 1GB NAND Flash • Two Gigabit Ethernet ports • User FPGA /w dedicated SDRAM • Conduction cooling version available • Three ruggedization levels available

Small form factor COM Express carrier • Compact & Basic COM Express type-III Modules support • Two PMC extensions • Two Gigabit Ethernet • Four USB 2.0 ports • One SATA and eSATA ports • Graphical video interface (RGB, LVDS, S-video) • 12 VDC power supply

8-channel serial communication UART controller • RS-232 and RS 422/485 software programmable interfaces • Up to 6.25 Mbps data rate @ RS-422/485 • Up to 250 kbps data rate @ RS-232 • Half and full duplex modes support • Conduction cooling compatible • Industrial temperature range -40/+85 °C

Computer Box Concept based on COM Express • PowerPC processor MPC8347E • Up to 2 GByte DDR2 • Up to 1 GByte NAND Flash • Two PMC slots • Graphic controller (RGB, S-video, LVDS) • Two Gigabit Ethernet ports • Two USB 2.0 ports • One internal SATA, one eSATA • 12 VDC power supply

PowerQUICC II Pro MPC8347E 400 MHz • Up to 2GB DDR2 SDRAM on SO-DIMM socket • Up to 1GB NAND Flash • Two S-ATA ports • 2D/3D graphic accelerator • Two Gigabit Ethernet ports • Two USB 2.0 Full-Speed ports • Available extended temperature range (-40/+85°C)

The ATMIV Includes support for ATM host termination, switching and L2/L3/L4 or higher interworking between Gigabit Ethernet interfaces and ATM interfaces • With support for AAL2 and AAL5, the ATMIV has the ability for real-time voice and video over AAL2, as well as signaling and IP over AAL5 in 3G networks • Enables development flexibility in building Next Generation infrastructure and can be configured in many ways depending on customer specifications and preferred architecture • Application Examples: 3G RNC, MSC, SGSN, and Node B; Voice over Packet; Video Streaming; Broadband Networks; ATM to IP Gateways; Femtocell Access Controllers

24-port Gigabit Ethernet base interface switch • Thirteen node ports, 1 inter-switch port • Six egress ports plus one 10 GbE SFP+ uplink port • Two ShMC ports, PICMG 3.0 R2.0 ECN001 • Two GbE ports and one 10 GbE port to RTM • 20-port 10 Gigabit Ethernet fabric interface switch • Twelve node ports, PICMG 3.1 option 9 • Up to eight egress ports by AdvancedMC modules • Broadcom BCM56800 + BCM56312 multilayer switch • AMC.0 midsize, single-width bays • AMC.1 P1 PCIe x1, AMC.2 TYPE5 XAUI, AMC.3 S1 SATA COM Express Intel Pentium M 1.4 GHz control plane processor

19" rack-mount, 12U height, 383.1 mm depth • 14-slot dual dual-star topology fabric interface • 14-slot standard Rear Transition Module • Dual-bussed IPMB • Hot-swappable IPMC controlled fan trays • Dual-PPS SHMM-500 based shelf manager slots • Dual -48 V DC Power Entry Modules

Intel Core 2 Duo processor, (up to 2.2 GHz) • Intel GME 965 chip • Up to 4 GB DDR2 667 MHz SDRAM • Five PCI Express x1, one PCIe x16 graphic (or x8) • Dual-24-bit LVDS, TV-out • SATA-300, PATA, Gigabit LAN, USB 2.0

High performance low power connectivity and packet processing for applications running in AdvancedTCA or MicroTCA platforms

15” (1024 x 768 resolution) LCD flat panel monitor specifically designed for industrial applications • The FPM-5151G features direct-VGA and DVI-D signal transmission, which allows any VGA control card to be used in your system • There’s an on-screen display feature that allows the user to adjust the images on the screen • A front access USB connector provides easy access to the controller through an USB extension cable • Other features include: lockable OSD keys with two user-defined contrast/brightness settings, 10-30 VDC power input, and as an option a combo RS-232 and USB interface for the touchscreen function • The FPM-5151G has a NEMA 4/IP65 compliant aluminum die-cast flat-sealed front panel with an antirust chassis • It supports panel, wall, desktop, rack, or VESA arm mounting • The FPM-515G suits factory and machine automation display solutions

The Industrial Automation Group of Advantech introduces a versatile Industrial Panel PC, the IPPC-6172A. The IPPC-6172A features a 17” SXGA TFT LCD with an Intel Pentium M/Celeron M processor (up to 2 GHz), 5 x USB 2.0 ports, up to 2 GB DDR2 memory, CD-ROM, 2 x PCI expansion slots, Gigabit LAN support, and supports Microsoft Windows 2000/XP/NT. • The IPPC-6172A features an optional touchscreen, allowing direct interface and with a gull-wing design, flat-sealed NEMA4/IP65 front panel, the IPPC-6172A is one of the most rugged, accessible, and feature-rich HMI devices on the market

Used for the interconnection of AMC and MCH modules into the backplane • Transfer high data rates of up to 12.5 Gbps • AdvancedMC backplane connector features press-fit eye of the needle contacts • Designed to allow up to 200 mating cycles • Integrated shield between the contact rows insure the connector performance in transferring high data rates

MMC controller support: Renesas H8S/2168, 2167, and 2166 • IPMB-L• Optional side-band LAN (with DHCP), KCS interface, BT interface, Serial over LAN, SMBUS interface • Optional TCP/IP stack with DHCP (requires dedicated NIC SMSC LAN91C113)FRU control • E-Keying support • Optional Platform Development Kit (PDK) for porting/customization

Onboard Intel μFC-PGA 478 Celeron M 600 MHz with 512K L2 Cache CPU • Intel 910GMLE / ICH6-M chipset • One 200-pin SODIMM up to 1 GB DDR2 SDRAM • Dual View, 2-CH LVDS • AC97 Audio • Realtek 8101L 10/100 Mbps LAN • 2 SATA, 4 USB 2.0, 2 COM, 4 PCI, ISA Bus • Fanless possible operation

JPEG2000 real-time video compression / decompression • Dual-channel capability • Full frame rate encoding of standard NTSC and PAL video • Up to ten video input channels with two selectable for compression • Programmable compression ratios • 100% software compatible with the currently available Orion PMC/PCI board • Available at the Level 200 conduction-cooled ruggedization level

CompactPCI and PICMG 2.16 compatible • Intel Core-Duo processor @ 1.66 GHz • Intel Core 2 Duo Mobile Processor L7400 @ 1.5 GHz for 64-bit operation • Supports two PMC sites, one of which optionally supports XMC modules • E7520 Chipset for PCIe support and high memory bandwidth • Bootable CompactFlash • Available in convection-cooled or conduction-cooled versions • Also available in rugged, conduction-cooled versions

Intel Pentium Core2 Duo Processor @ 1.5 GHz or 2.16 GHz • Available in conduction-cooled versions for rugged applications • Supports two PMC sites, one of which optionally supports XMC modules • E7520 chipset for PCIe support, high memory bandwidth and ECC support • Two Gb LAN front panel ports plus two more routed to the backplane in compliance with PICMG 2.16 • Onboard SVGA Controller

ASIC, Embedded Systems, Application Software domains

The upgraded 5-slot ATCA backplane now features standard MicroTCA connectors, which are small and dense, for the Elma’s IPM Sentry shelf manager connections. • In addition to saving space, the connectors are widely available, reliable, and with compression mount design are field-replacable. • If damaged, the MicroTCA connector can be unscrewed from the backplane and replaced. • The 5-slot ATCA backplane features a 3x replicated Mesh topology, although a standard Full Mesh or even Dual Star can be implemented. • The backplane has 18 layers and is optimized for performance via signal integrity studies

Two, Quad-Core Intel Xeon (2.13 GHz) LV processors • Up to 32 GB main memory • Multiple software packages including operating system • PICMG 3.0 Gigabit Ethernet base interface support • PICMG 3.1, Option 1 and 9 fabric interface support • Two onboard 2.5" form factor hard disk bays supporting hot swap and RAID 0/1 • Multiple disk options including SAS hard drives • SATA drives with extended temperature range • Solid state disks • Designed for NEBS and ETSI compliance

Polyhedra fault-tolerant relational database • Enea Element SAF-conformant, HA middleware with in-service upgrade, HPI shelf management interface software and application development framework facilities • Support for ConfD, the leading XML-based software solution for on-device network management • Enea dSPEED Platform - DSP subsystem management • Enea LINX Interprocess Communications (IPC) services for distributed network topologies

System-wide interprocess communications, discovery, and publish/subscribe services • Event logging and network supervision • High-availability shelf and fault management • Standards-based (AdvancedTCA, Service Availability Forum) • Scales from DSPs, to 32-bit CPUs and network processors • Linux and RTOS support • Spans control and data planes

Conduction cooled mezzanine card without faceplate I/O • Extended shock and vibration tolerance • 133 MHz PCI-X PrPMC Interface • Up to 512 MB 333 MHz DDR SDRAM • 4 MB Soldered Flash • Two 10/100/1000 Ethernet Ports • Two RS-232 serial ports • Rear I/O • Integrated 256 KB SRAM or L2 Cache • VxWorks Driver and BSP • Linux LSP

Freescale MPC8572E PowerQUICC III processor with dual PowerPC e500 cores at up to 1.5 GHzation/mswor • 3U VPX (VITA 46) module • Ruggedized Enhanced Design Implementation (REDI)889-36 • Conduction or air coolingx-xbitmap, imag • Two channels of up to DDR2-800 ECC SDRAM, up to 4 GB (2 GB each) • Up to 256 MB of NOR flash • Up to 4 GB of NAND flash • PrPMC/XMC interfacedule • x4 PCI Express or Serial RapidIO Fat Pipe P1.A fabric interconnect • x4 PCI Express P1.B fabric interconnect • Two SERDES Gigabit Ethernet Thin Pipe P1 fabric interconnects

A connector board member for the iVDR Consortium, FCI’s connector range contributes to standardizing the next-generation large-capacity data platform in applications such as media cartridges and internal port terminations; PCs, servers, set-top boxes, and the like; and auto-loading mechanisms in host applications • The iVDR standard can be a hard disk drive or a solid-state device capable of recording copyright-protected high-definition content without loss of quality while maintaining SAFIA security protection • The iVDR allows for the sharing of various content including movies, music and programs, over a variety of devices such as information appliances, home servers, video recorders, automobile AV devices and PCs • FCI’s iVDR connector provides a single row of 26 contacts and 1.27 mm pitch • The plug is available in a right-angle version with SMT leads and has a hold-down feature on both ends for lead-free assembly • The receptacle is available in right-angle and vertical versions with SMT leads. The right-angle form factor features a fixed-screw hole while the vertical type features a hold-down on each end of the connector • The iVDR connector is RoHS-compliant and compatible with lead-free processing temperatures

4-channel, 250 MHz 12-bit ADC • Transformer-coupled inputs • 50 ohm input impedance • Xilinx Virtex-5 SX95T user-Programmable FPGA • 62 dB SNR, 76 dB SFDR • PCIe x4 interface, 1.25 GB • GC5016 Digital Down-Converter • QDR II SRAM 16 MBytes • Hardware Development Kit (HDK) included • Windows and Linux Software Development Kits

6U CompactPCI form factor • 24-port Gigabit Ethernet switch • Configuration managed solution • Control andmonitoring capabilities via local or remote access • Onboard management processor • L-2 switching at wire speed • High-availability hot swap • OpenWare Lite Switch Management Environment • Supports Virtual LANs (VLANs) Supports Rapid Spanning Tree Protocol (RSTP) • Port Mirroring support • Trunking or manual link aggregation • SNMP support

4 SAS channels • AMC.1 and AMC.3 compliant • Supports up to 2 off-board SAS channels • Supports up to 8 PCI Express lanes at transfer rates of 2.5 Gbps per lane full duplex • SAS hard disk drive up to 146 GB capacity • Supports 1.5 and 3.0 Gbps SAS data transfers • IPMI v2.0 compliant MMC • Supports RAID with integrated striping and mirroring firmware; no software support required • Supports single and dual port SAS drives • Support for Solaris, Linux, Windows 2000, and Windows XP • Available with mid-size or full-size faceplates

Power and flexibility of the Virtex-5 FXT with build options for SXT and LXT for demanding defense and aerospace applications • Xilinx Virtex-5 FPGA - FX100T with PPC440 hard cores or SX95T or LX110T • External Memory - QDR 2 SRAM, DDR2 SDRAM, SPI Flash • Rear I/O - VITA 42.3 PCIe gen2 (to 5 GHz) or VITA 42.2 Serial RapidIO build option, RocketI/O to 6.5 GHz via GTX ports; LVDS, GPIO, GbE, Serial Ports • Front I/O - GbE, Serial, LVDS, GPIO • VWRAP - EDK and ISE project with tested cores; VBIT - Built-In-Test • 5 ruggedization options

Quad-Core Xeon processor,operating up to 1.6 GHz or Dual-Core Xeon processor, operating up to 2.33 GHz • Supports Intel’s Virtualization Technology (VT) for highest performance • Wide range of CPU performance to meet most power budgets • Supports up to 8 GB of 144-bit ECC, 667 MHz DDR-2 memory • Ultra fast memory bank with 10.6 GBps transfer rate • Ultra fast Front Side Bus (FSB), up to 1333 MTS • Quad GbE Ethernet ports with TCP/IP Offloading Engine (TOE) • High-performance, Dual Pipe Video to front/rear panel I/O • Field upgradable video module to deploy latest video technology • One 8-lane XMC /PMC-X compliant site with rear I/O • Six USB-2.0, one Serial port with RS-232/422 and 20 GPI/O lines • Six SATA-2 ports with RAID support and one PATA port • Up to 16 GB of Flash Memory via CompactFlash • Headphone, Mic, Line-In and SPDIF Line-Out for Voice Recognition/VoIP • 1 MB of BIOS/user Flash and 256B of FRU EEPROM • RTC with onboard, external, or no battery support • Optional expansion I/O module (2nd site) via SAM-E with: Quad ultra high-performance NVidia graphics or dual PMC/XMC each with x8 PCI Express or two 2.5" SATA SSD/HDD with RAID support • Health monitoring and reporting • Baseboard Management Controller (BMC) to meet PICMG 2.9 • CPU temperature and voltage monitoring for safe operation • Full diagnostics and health reporting with Pass/Fail indicators • Auto Detect System Master/Peripheral Master CompactPCI operations • Fully hot swappable 64-bit/66 MHz CompactPCI Bus • Support for Windows Vista/XP/2000, VxWorks and Linux • Available in standard 0 °C to +60 °C or extended temp -40 °C to +85 °C

Quad-Core Xeon processor, operating up to 1.6 GHz or Dual-Core Xeon processor, operating up to 2.33 GHz • Supports Intel’s Virtualization Technology (VT) for highest performance - Wide range of CPU performance to meet most power budgets • Supports up to 8 GB of 144-bit ECC, 667 MHz DDR-2 memory • Ultra fast memory bank with 10.6 GBps transfer rate - Ultra fast Front Side Bus (FSB), up to 1333 MTS • Quad GbE Ethernet ports with TCP/IP Offloading Engine (TOE) • High-performance, dual pipe video to front/rear panel I/O • Field upgradable video module to deploy latest video technology • One 8 lane XMC /PMC-X compliant site with rear I/O • Six USB-2.0, one Serial port with RS-232/422 and 20 GPI/O lines • Six SATA-2 ports with RAID support and one PATA port • Up to 16 GB of Flash Memory via CompactFlash • Headphone, mic, line-In and SPDIF line-out for voice recognition/VoIP • 1 MB of BIOS/user Flash and 256 B of FRU EEPROM • RTC with onboard, external, or no battery support - Optional expansion I/O module (2nd site) via SAM-E with: Quad ultra high-performance NVIDAI graphics or dual PMC/XMC each with x8 PCI Express or two 2.5" SATA SSD/HDD with RAID support • Health monitoring and reporting • Baseboard Management Controller (BMC) to meet PICMG 2.9 • CPU temperature and voltage monitoring for safe operation • Full diagnostics and health reporting with Pass/Fail indicators- Auto Detect System Master/Peripheral Master CompactPCI operations • Fully hot swappable 64-bit/66 MHz CompactPCI bus • Support for Windows Vista/XP/2000, VxWorks, and Linux • Available in standard 0 °C to +6 0°C or extended temp -40 °C to +85 °C

Up to 2.16 GHz Core 2 Duo processor with 4 MB of L2 cache • Ultra low-power requirements as low as 12 W Max • Up to 3 GB of 667 MHz DDR-2 SDRAM • Dual GbE ports, supports PICMG 2.16 with TCP/IP Offloading Engine (TOE) • Dual Video supports DVI and RGB simultaneously (Lose DVI with XMC) • Sync-On-Green support for RGB video • Two PMC-X/XMC compliant sites with rear I/O • Support for one Mini PCI or Mini PCI Express module • Up to 16 GB CompactFlash drive or 1.8" 64 GB SSD • Onboard support for up to 128 GB of SSD or 200 GB HDD (Lose PMC/XMC) • Support for dual channel, ultra high-performance video (Lose PMC/XMC) with: dual high-performance NVIDIA Quadro FX video ports • Each video port supports 2048x1536 resolution @ 85 Hz • Each channel supports RGB Video and Digital Video (DVI-I) • Line-in, headphone-out and mic for voice recognition/VoIP • 3 W Mono Audio amplifier to drive speaker directly • Five USB-2.0 ports and two Serial ports • Four SATA-2 ports with RAID support and two PATA ports (Lose one SATA) • 16 individually programmable user I/O lines • 1 MB of BIOS/user Flash and 256 B of FRU EEPROM • RTC with external/internal or no battery operation • Baseboard Management Controller (BMC) to meet PICMG 2.• CPU temperature and voltage monitoring for safe operation • Full diagnostics and health reporting with Pass/Fail indicators • Auto Detect System Master/Peripheral Master CompactPCI operations • Fully Hot Swappable 64-bit/66 MHz CompactPCI Bus • Support for Windows Vista/XP/2000, VxWorks and Linux • Available in standard, 0 °C to +60 °C or extended temp -40 °C to +85 °C

Two Dual-Core Xeon processors, operating up to 2.33 GHz • Supports Intel’s Virtualization Technology (VT) for highest performance • Wide range of CPU performance to meet most power budgets • Supports up to 16 GB of 144=bit ECC, 667 MHz DDR-2 memory • Two independent memory banks, each with 10.6 GBps transfer rate • Ultra fast dual Front Side Bus (FSB), each up to 1333 MTS • Quad GbE Ethernet ports with TCP/IP Offloading Engine (TOE • High-performance, dual pipe video to front/rear panel I/O • Field upgradable video module to deploy latest video technology • Six USB 2.0, one com port with RS-232/422 and 20 GPI/O lines • Six SATA-2 ports with RAID support and one PATA port • Optional support for 1.8" SSD/HDD (Limits memory to 8 GB)• Headphone, mic, line-In and SPDIF line-out for voice recognition/VoIP • 1 MB of BIOS/user Flash and 256 B of FRU EEPROM • RTC with external/internal or no battery operation • Optional expansion I/O module (2nd site) via SAM-E with: Quad ultra high-performance NVIDIA graphics or Dual PMC/XMC each with x8 PCI Express or two 2.5" SATA SSD/HDD with RAID support • Health monitoring and reporting • Baseboard Management Controller (BMC) to meet PICMG 2.9 • CPU temperature and voltage monitoring for safe operation • Full diagnostics and health reporting with Pass/Fail indicators • Auto Detect System Master/Peripheral Master CompactPCI operations • Fully Hot Swappable 64-bit/66 MHz CompactPCI Bus • Support for Windows Vista/XP/2000, VxWorks, and Linux • Available in standard, 0 °C to +60 °C or extended temp -40 °C to +85 °C

Ultra low-power consumption 5 W maximum (entire SBC) • Up to 1.86 GHz processor with 512 KB of L2 cache • IA-32 core architecture for 100% X86 code compatibility • Up to 533 MHz Front Side Bus (FSB) • Up to 1 GB of 533 MHz DDR-2 SDRAM • Dual GbE ports with TCP/IP Offloading Engine (TOE) • High-performance graphics with 3D acceleration • Supports video resolutions up to 1280x1024 @ 85 Hz • Dual Video to support DVI and LVDS • 24-bit LVDS for direct connection to LCD displays • Up to 16 GB of bootable Flash memory via CompactFlash • Six USB-2.0 ports, two Serial ports with RS-232/422 support • Quad Serial ATA ports with RAID functions • Two 8-bit Secure Digital I/O /MMC ports for custom I/O • Special Application Module (SAM) for custom I/O with: custom high-speed I/O Via; 1 Lane PCI Express, SATA • Up to 8 I/O lines to J2 rear I/O • Optional Mini PCI-Module with rear I/O for 802.11, GPRS • Optional PCI Express Card for Vast Custom/Off the shelf • 1 MB of BIOS/user Flash and 256 B of FRU EEPROM • RTC with onboard, external or no battery support • Baseboard Management Controller (BMC) to meet PICMG 2.9 • Onboard heaters and control circuit to assure operations • Full Health reporting and monitoring with extensive BIT/EBIT• Auto Detect System Master/Peripheral Master CompactPCI operations • Fully hot swappable 32-bit/66 MHz CompactPCI bus • Support for Windows Vista/ XP/2000, VxWorks and Linux • Available in standard 0 °C to +60 °C or extended temp -40 °C to +85 °C

SAFE-FAT is a full-featured, high-performance FAT12/16/32-compatible file system that protects file structures from unexpected resets. • If the system resets unexpectedly for any reason, it returns in a coherent, consistent and usable state. • If a storage medium uses SAFE-FAT and it is reset or is moved to another device running SAFE-FAT, then the system works cleanly, without loss of data and without corruption of the files and associated meta-data. • SAFE-FAT is compact; it typically uses about 40K for code and 15K for RAM. • Runs with almost any operating system, or without an operating system • SAFE-FAT uses a standard familiar API

Consolidates industrial computer, router, PoE, and managed switch • RISC, 64 MB SDRAM, fanless • Operating temperature -40 °C to +80 °C • Linux, Modbus gateway for ready to use • 3. 2 USB, SD card for control program upgraded • Industrial Router (five Ethernet ports) • Free combination between WAN and LAN • IP routed, static routing, NAT, firewall, DMZ • Industrial PoE • 4 ports, IEEE802.3af 15.4 W • PoE scheduling • Industrial Managed Switch • QoS • VLAN (802.1Q, port-based) • Industrial Serial Device Server • Two RS-232 ports, two RS-232/422/485 ports • Virtual COM • Industrial Digital I/O Controller • 4 DI and 4 DO • DIO scheduling

High efficiency: Up to 96% • Very low quiescent current: Only 20 µA • 1.25 A output current • 2.5 V to 5.5 V input voltage range • 2.25 MHz constant frequency operation • No Schottky diode required • Low dropout operation: 100% duty cycle • 0.6 V reference allows low output voltages • Shutdown mode draws ≤ 1 µA supply current • Current mode operation for excellent line and load transient response • Over-temperature protected • Low profile (1 mm) ThinSOTTM and 6-lead 2 mm × 3 mm DFN packages

Allows safe board insertion and removal from a live backplane • Controls load Voltage from 1 V to 6 V • No gate components required • Adjustable current limit with circuit breaker • Limits peak fault current in